Absorber with gas
tank connected rigidly, compared to most of the shock absorbers to separate
tank is used a diaphragm instead of the membrane and is not present the control
valve of the expansion of the pneumatic chamber.
Description:
1) Sheath gas tank and
2) Stem
3) snap rings
4) Plate bearing spring
5) Spring
6) End cap and preload adjustment
7) Cap gas, either in the gas valve is not in the version with the gas valve (inverted profile)
8) Diaphragm Mobile
9) Pad switch (compression)
10) Wiper
11) A seal assembly, oil seal oil seal and bases and closing damper
12) Buffer Buffer or negative limit switch (extension)
13) Piston with piston ring and strip / sliding.
Description:
1) Sheath gas tank and
2) Stem
3) snap rings
4) Plate bearing spring
5) Spring
6) End cap and preload adjustment
7) Cap gas, either in the gas valve is not in the version with the gas valve (inverted profile)
8) Diaphragm Mobile
9) Pad switch (compression)
10) Wiper
11) A seal assembly, oil seal oil seal and bases and closing damper
12) Buffer Buffer or negative limit switch (extension)
13) Piston with piston ring and strip / sliding.
Out Of Topic Show Konversi KodeHide Konversi Kode Show EmoticonHide Emoticon